AMD Ryzen Mobile 4000: Measuring Renoir’s Die Size
by Dr. Ian Cutress on January 14, 2020 9:00 AM EST- Posted in
- CPUs
- AMD
- Trade Shows
- Ryzen Mobile
- Renoir
- CES 2020
- Ryzen 4000
I’m pretty sure that the next time I go to a trade show where new silicon is being announced, the next tool I need in my backpack is a set of calipers in order to measure the die size. While die size doesn’t in of itself mean much as a number on its own, it is the end result of lots of hard work, focused co-design between silicon engineers and the semiconductor fabs, and ultimately there’s a fine balance between features, die size, performance, power, and at the end of the day, cost. With AMD showcasing the first x86-based 8-core CPU to move into the 15 W power envelope, finding out the die size is one of the elements of our investigation into how AMD has created its new Renoir / Ryzen Mobile 4000 product.
When I first saw the silicon, I wasn’t able to take pictures. Instead, I had to guess the size by manually placing it next to a 8-core Zen 2 chiplet from AMD’s monster 64-core Threadripper 3990X. We’ve known the die size for a while now, at 10.32 x 7.34 mm, or 75.75 mm2. My guess at the time that the new Renoir APU was almost exactly double the Zen 2 chiplet, and I mean it was scary how close to double the size it was. At the time of the announcement of Ryzen Mobile 4000, I had stated in our article that I estimated 150 mm2 for the die size. Turns out, I wasn’t too far wrong.
This image is not to scale.
Later at CES, I went up to the AMD booth and this time they were more than happy for me to take photographs of the new silicon. The 3990X was also there, so I could place the two side by side and get a reasonable reference photograph on which to do calculations. This is the point of the event where I should have remembered to bring calipers! Taking photographs of chips is actually quite hard, making sure you get them lined up perfectly to get the same perspective, but also having enough light to get clear defined silicon edges.
In our picture, the Renoir chiplet you may notice is very slightly angled to the camera, which we’ve compensated for in our measurements.
With that in mind, here are our numbers.
The Zen 2 chiplet on the left, measures 10.32 mm by 7.34 mm, which is a ratio of 1.406 to 1.
In our image, the chiplet measured 265 pixels by 189 pixels, which is a ratio of 1.402 to 1.
In our image, the Renoir SoC measured 282 pixels by 350 pixels, which is a ratio of 0.806 to 1.
If we take the corresponding pixel dimensions, that gives us 10.98 mm by 13.59 mm, a ratio of 0.808 to 1.
This means that the die size of an eight-core Renoir APU with eight 2nd Gen Vega compute units, according to our calculations, 149.27 mm2.
Die Sizes | ||||||
AnandTech | x | y | Die Size | Process | Cores | EUs/ CUs |
AMD Zen 2 Chiplet | 10.32 | 7.34 | 75.75 mm2 | TSMC N7 | 8 | - |
Intel Ice Lake | 11.44 | 10.71 | 122.52 mm2 | Intel 10 | 4 | 64 |
Intel Tiger Lake | 13.64 | 10.71 | 146.10 mm2 | Intel 10+ | 4 | 96 |
AMD Picasso | 19.21 | 10.92 | 209.78 mm2 | GF 12 | 4 | 11 |
AMD Renoir APU | 13.59 | 10.98 | 149.22 mm2 | TSMC N7 | 8 | 8 |
That’s pretty close to my 150 mm2 estimate, and I’ve also spoken to a few trusted individuals who have been tracking Zen 2 die structure sizes and graphics structure sizes, and they came out very similar, within 1mm2 or so.
At 149.27 mm2, assuming that AMD is achieving the same defect ratio on the silicon as reported by TSMC for the standard N7 process (0.09 defects per cm2), the process yield should be around 90%. Obviously that doesn’t take into account manufacturing for yield, or the distribution of the power/frequency of the chips within a wafer, but it’s still rather impressive.
Before AMD announced this new chip, there was a good deal of speculation as to how AMD would build it: either four cores with more graphics, or with eight cores and graphics only a little better. One factor of that was the die size: at 200 mm2, one would have expected AMD to definitely use eight cores. For sub 125 mm2, in order to maintain GPU performance, perhaps a quad-core design only have been suitable. However, AMD is claiming a great win here: eight Zen 2 cores, with frequencies at 1.8-4.3 GHz at 15 W, and despite fewer graphics compute units (down from 11 to 8), a higher per-compute unit performance claim of +56% means that performance is actually higher. All just shy of 150 mm2.
We are living in the future. I can’t wait for more.
It's worth noting that AMD's official number for the Zen 2 die size is 74 mm2. This is derived from the floorplan of the chip, which during manufacturing has additional space added to ensure clean die seperation between adjacent die prints. Ultimately what we get as the consumer is that seperation lane (known as a scribe lane) from one side of the die to the other, which is just slightly bigger than the floor plan that AMD supplies to the fabrication plant / TSMC. With calipers, what we get is that additional space, which is above AMD's quoted size.
103 Comments
View All Comments
Ian Cutress - Tuesday, January 14, 2020 - link
Keeping it monolithic has benefits for the IF and also idle latency, which is key for a mobile CPU. I don't expect AMD to go chiplet with graphics on this sort of product any time soon. Maybe in something higher up the thermal stack, or for specific customers, perhaps.Fataliity - Tuesday, January 14, 2020 - link
Do you know if the motherboard has a chipset? Or is the chipset in the die IO?sing_electric - Wednesday, January 15, 2020 - link
What's interesting is that AMD also launched their 1st mobile-focused dGPUs in ages at the same time. My bet is AMD will keep the mobile CPU's monolithic but might possibly have release a version to specific customers with either the iGPU part disabled, or cut down to 1 active CU (for battery life purposes when mostly idle) for use with dGPU designs. Depending on the chip layout, the dead silicon from the other CUs might let the chip run with more power longer before throttling.Namisecond - Wednesday, January 22, 2020 - link
I think the target market you are thinking of is called "embedded"ET - Tuesday, January 14, 2020 - link
I had expected that to be the case for 45W mobile and for desktop APUs, with 15W APUs being 4 cores. I'm glad that AMD gave us 8 cores at 15W.I still don't think that a chiplet configuration is out of the question for future high power APUs.
Gondalf - Tuesday, January 14, 2020 - link
Honestly i think we well'never see much in the 15W of this SKU, bet 25 W will be the standard (70% more power headroom). 8 cores eat a lot of power and running then slow do not help much the customer and makes your Laptop not much snappy/delusional.alufan - Tuesday, January 14, 2020 - link
sigh~~~~ people doing work at x speed
~~~~~~~~people doing the same work at the same speed
simple maths really but lets wait for the reviews and I for one look forward to your comments then
Korguz - Tuesday, January 14, 2020 - link
you are the one that is delusional gondalf.. looks like your thinking is.. if intel can do it.. no one else can too.. maybe thats when intel can only do 4 cores with what ever lake they are making for mobile now.. start posting proof of your opinions or go away..iranterres - Tuesday, January 14, 2020 - link
With workloads becoming increasingly more parallel on CPUs, 8 cores is just so sweet.vortmax2 - Tuesday, January 14, 2020 - link
Some of the best, non-combative comment I've seen in a long time here. Everyone is excited about 2020 laptops due with these chips. Very happy that AMD is back in the game - benefits us all.