One particularly annoying drawback of nearly all powerful electronics is the noise generated from their required coolers. Although PC components are getting more and more efficient, the general rule still holds: a powerful PC will come with significant cooling requirements.

This typically is not a concern for gamers, as the noise generated by the PC is often overshadowed by the speakers or headphones. For users who want to build a high-performance entertainment center, however, noise can be a significant issue. When a PC is installed in the living room, it needs to be powerful enough for games, but still quiet while playing/streaming media. The same goes for users who combine their professional and gaming needs into one system or, for whatever reason, they require abundant processing power to perform their profession.

One of the major noise sources inside a PC is the power supply unit (PSU). Low-cost PSUs tend to be less efficient – losing a larger portion of their input power to waste heat – and as a result they rely on a strong flow of air rather than heatsink surface area alone in order to dissipate heat, which makes them quite loud when power requirements are high. Thankfully, improvements in PSU efficiency have been driving down the amount of waste heat (and thus noise) over the years – at least for the higher-end models. As a result, what we often find is that the higher quality (higher priced) a PSU is, the quieter it operates.

In today’s review, we are having a look at a PSU from SilverStone that puts that rule to the test: the Nightjar NJ700, a 700 Watt ATX PSU that is so efficient and well-designed so as to require no active air cooling at all. Although passively cooled PSU are as rare as hen’s teeth, we have seen several passively cooled PSUs in the past, including our recent review of SilverStone’s own Nightjar NJ450-SXL. The unique aspect of the Nightjar NJ700 is the high power output of 700 Watts, which requires an amazingly efficient design to be able to cope with the thermal losses without any active cooling.

Power specifications ( Rated @ 50 °C )
AC INPUT 100 - 240 VAC, 50 - 60 Hz
RAIL +3.3V +5V +12V +5Vsb -12V
MAX OUTPUT 20A 20A 58A 2.5A 0.3A
100W 696W 12.5W 3.6W
TOTAL 700W
 

Packaging and Bundle

We received the SilverStone NJ700 in an aesthetically simple but practical cardboard box. The artwork is simplistic, with a blue/gold color theme and based around a picture of the PSU itself. On the other hand, the box is sizable and with very thick exterior walls, providing ample shipping protection.

SilverStone usually goes with the bare minimum number of bundled items, but the NJ700 seems to be an exception. Inside the box, we find the mounting screws, the required AC power cable, a thorough manual, numerous cable ties, and five high-quality black/white cable straps.

The SilverStone Nightjar NJ700 is a fully modular PSU and every cable, including the 24-pin ATX cable, can be detached. With the exception of the 24-pin ATX cable, the rest of the cables are ribbon-like, “flat” type. The main 24-pin ATX cable is made of all-black wires too but they are bundled and held inside a black nylon sleeve.

SilverStone Nightjar NJ700
Connector type Hardwired Modular
ATX 24 Pin - 1
EPS 4+4 Pin - 1
EPS 8 Pin - -
PCI-E 6+2 Pin - 4
PCI-E 8 Pin - -
SATA - 12
Molex - 6
Floppy - 1

The SilverStone Nightjar NJ700 PSU

External Appearance

The SilverStone Nightjar NJ700 definitely is an irregular design, with all surfaces except its bottom perforated to allow for the maximum possible passive airflow. The perforation pattern alone is enough to hint the OEM behind this PSU’s creation to a seasoned expert.

 

Its chassis is dimensionally close to that of an ATX unit but the NJ700 is 170 mm long, making it a bit longer than what the ATX standard dictates. Still, there should not be any clearance issues with any but the most restrictive of PC cases. Due to its thermal design, however, we would not recommend installing it inside a case with a tight PSU cover because it would essentially block any heat transfer from the unit. The NJ700 is designed so as to be installed with the vents facing upwards, letting the hot air rise and ultimately exit the case via other fans or vents.

In order to leave the heatsinks unobstructed, the designer moved the sticker with the unit’s electrical specifications and certifications to the bottom side of the unit. Even there, the sticker was limited to less than half the surface area, as small vents have been placed under critical components.

 

At the rear side of the PSU, we find the typical on/off switch and the AC cable receptacle. The interesting thing here is that SilverStone’s engineers placed two mounting hole patterns, allowing the mounting of the PSU to face upwards or downwards. Depending on the case that the PSU will be installed in, the user has to make an educated guess in order to ascertain the optimal orientation for effective passive air cooling. The front side hosts the connectors for the modular cables, all of which are black but are keyed and it is not possible to mix-up the connectors while attaching the cables. A basic legend is sprayed directly on the PSU’s chassis.

Internal Design

With no fan to talk about inside the SilverStone NJ700, we jump right away to the OEM of the platform, who is none other than SeaSonic. As we mentioned above, this is obvious to an experienced PC builder, as the external design of the PSU is, with the exception of the company’s logos, practically identical to that of the SeaSonic Prime Fanless. SilverStone usually employs Enhance for their fanless PSUs but, apparently, Enhance does not yet have a platform that can deliver this high a power output without any active cooling.

 

As expected from SeaSonic and for the nature of this particular design, the platform that the NJ700 is based upon is pretty much the best it could possibly be without employing cutting-edge digital electronics. That their engineers managed to squeeze 80Plus Titanium efficiency levels out of an analog design is quite a feat on its own. SeaSonic probably sticks with such designs due to their extremely high reliability and proven track record from decades of use.

The insides of the SilverStone Nightjar NJ700 do not look much different than any other high quality 700W PSU. Even the heatsinks, though sizable, are not as substantial as one would expect from a passively cooled unit. Only the heatsink placed directly on the main transformer stands out compared to typical ATX products.

A generous filtering stage begins at the back of the AC receptacle, under a shield, with six Y capacitors, three X capacitors, and two filtering coils. There are two powerful rectifying bridges, with a sizable heatsink sandwiched in between them. There are two APFC capacitors, both made by Nippon Chemi-Con and rated at 400v/470μF each.

The primary side of the PSU is a standard full-bridge configuration with an LLC resonant converter. On the secondary side, four MOSFETs generate a single 12V line, with additional DC-DC converters present to generate the 5V and 3.3V lines from that. The difference is that both the four inverting transistors on the primary side and the four converting MOSFETs on the secondary side are top-tier products with extremely low drain-source resistance and gate charge, making them remarkably efficient.

Most of the secondary capacitors in the SilverStone NJ700 are polymer products made by FPCAP. A lot of them are placed on the secondary PCB that holds the connectors for the power cables for the final filtering of the DC power lines. Nevertheless, there are a few electrolytic capacitors present, one made by Rubycon and the rest by Nippon Chemi-Con, making the Nightjar NJ700 an all-Japanese affair.

Cold Test Results (~22°C Ambient)
POST A COMMENT

46 Comments

View All Comments

  • Oxford Guy - Monday, December 27, 2021 - link

    I tracked down a review of Seasonic PSUs (SS-1050XP3 & SS-1200XP3) from this site for those claiming fans are no problem in PSUs. The first red flag is the lifespan of the fan:

    'Seasonic went with a San Ace 9S1212H403 120mm fan in both of their newest models.

    The life expectancy of this fan is 40,000 hours, a rather mediocre rating for similar devices, translating to about 4.5 years of 24/7 use at 60°C, albeit this rating also is for a free, unobstructed air path (zero static pressure, max airflow).'

    4.5 years is a lot less than infinite, since a fanless PSU doesn't have a fan lifespan issue.

    Then, we get to the noise, which is a far far cry from 'silent', even in the cold tests:

    SS-1050XP3 results, cold test (decibels at the specified wattage):

    'The 120mm fan can be clearly heard at just 40% load and its speed climbs rapidly as the load increases, surpassing even 50dB(A) at very high loads. At such noise levels, the Platinum SS-1050XP3 can be clearly heard from rooms away.'

    400 — 32
    500 — 36
    600 — 38
    700 — 42
    800 — 46
    900 — 48
    1000 — 50
    1050 — 51

    SS-1050XP3 results, hot test:

    200 — 34
    300 — 37
    400 — 39
    500 — 44
    600 — 46
    700 — 49
    800 — 51
    900 — 53
    1000 — 55
    1050 — 55.5

    I guess I was being too kind by talking about the concern being a PSU that's loud enough to be heard from rooms away. Ear-splitting is apparently another tier here:

    'The behavior of the cooling system remains similar with the PSU inside our hot box, with the exception that the fan is even more aggressive, starting at just 20% load and with its speed climbing rapidly as the load increases. At 50% load, under such conditions, the Seasonic Platinum SS-1050XP3 already is a loud PSU, with the sound pressure reaching ear-splitting levels at >80% load.'

    SS-1200XP3 cold test:

    600 — 39
    700 — 41
    800 — 44
    900 — 47
    1000 — 49
    1100 — 52
    1200 — 52

    SS-1200XP3 hot test:

    300 — 37
    350 — 39
    400 — 40
    500 — 43
    600 — 46
    700 — 48
    800 — 51
    900 — 52
    1000 — 54
    1100 — 56
    1200 — 56

    PSUs like those sell fanless units to people like me.
    Reply
  • Oxford Guy - Monday, December 27, 2021 - link

    Sound levels are from 1 metre away. Forgot to mention that. Reply
  • Wrs - Tuesday, December 28, 2021 - link

    This is silly. Not only are these 5 year old designs, but can you explain how someone worried about noise would be drawing 1000W? The PSU has a fan to cool ~120W, but what's cooling the 1000W? If I were super worried about noise, like using a PC in a broadcast studio without mic noise cancellation, I would probably get a system of no more than 250W typical, with a 650W+ hybrid PSU where the fan doesn't even spin at 250W. Effectively fanless in production, turns on during emergency/off hour loads to save the PSU.

    I'm not worried one bit about fan life expectancy these days. It's trivial to find a start-stop fan PSU. Mine from 11.5 years ago is ball bearing and fully start-stop, though that was rare back then. These days mainstream FDB is used with hysteresis. Remember there's capacitor life expectancy in a PSU and mobo. For every 10C delta, expect a doubling or halving of life. A PSU intake is not going to be 60C, which is scalding hot. A modern case has the PSU draw air straight from ambient
    Reply
  • Oxford Guy - Tuesday, December 28, 2021 - link

    'This is silly.'

    I'm amazed you're still at it.
    Reply
  • Wrs - Tuesday, December 28, 2021 - link

    Side note. Human speech typically runs 50dB at home, 60dB in public. I'd hope neither is ear-splitting!

    Here's a PSU that measures 20dB at 1300W. The review is almost 4 years old, but the unit was well ahead of its time, close to the pinnacle of efficient design, you could say. Uses technologies still not commonplace, especially GaN FETS. https://www.techpowerup.com/review/corsair-ax1600i...
    Reply
  • Oxford Guy - Tuesday, December 28, 2021 - link

    Even quieter is a fanless unit. Reply

Log in

Don't have an account? Sign up now