Assembling the BitFenix Outlaw

Installing our testbed into the BitFenix Outlaw was at least a little bit involved, but that's due more to the cramped quarters stemming from the smaller enclosure design than anything else. What's important is that BitFenix makes the most of the Outlaw's relatively small real estate (at least, small for a full ATX case).

Slotting the motherboard in was easy enough, though I'm finding the I/O shield for our testbed has seen better days. BitFenix has a couple of motherboard standoffs already installed. Our CPU cooler doesn't quite line up with the 120mm exhaust fan, though I'm not sure I know of any that would; the fan's placement is a bit low. The mounting holes surrounding the board are remarkably small but surprisingly good for keeping cable clutter contained.

Since the case is inexpensive, the "tool-less" drive installation really just boils down to thumbscrews. BitFenix includes thumbscrews designed for the smaller threading of optical drives as well as larger ones designed to fit into the rubber-grommeted bottom two hard drive bays (they'll also fit in the top bays). Our Blu-ray drive is on the long side and does overlap the side-mounted SATA ports a little, though, and the hard drive encroaches a bit over the bottom fan mount.

Honestly I'm not a big fan of bottom fan mounts anyhow; with rare exception (SilverStone's rotated enclosure designs like the FT02) I don't see these getting any use as most cases just aren't designed to sit high enough off of the floor (usually carpet). Compounding that is the fact that they're usually not far enough from the power supply; our 180mm power supply actually encroaches enough on the mount to prevent you from putting a fan there, and 180mm isn't an unusual or excessive length for a power supply. But I digress; installing the drives was easy enough to do, although the 2.5" SSD needs to be mounted to the bottom of the case as it has no "bay" of its own (or you'll want to buy a 2.5" to 3.5" adapter sled). Not a big deal, but it warrants mentioning.

Expansion cards require popping out the slot covers cut from the frame of the Outlaw. The steel used here is especially thin and fragile, pointing to a place where costs are liable to have been cut in manufacture. Sometimes that's not all bad, though; twisting the slot covers out was a lot easier than it usually is. Finally, sliding the power supply in was also pretty easy.

Wiring things up was a little bit trickier, though, and part of that is just due to the nature of a small case. Surprisingly, where Rosewill fouled things up with the Ranger, BitFenix gets the cable organization right; mostly it's just a matter of threading everything through the mounting holes in the motherboard tray. Having a modular power supply certainly helped (although AUX 12V clearance is at an all time low), but if you're spending $50 on a case chances are you're not up for splurging on modular kit either.

I'm mostly happy with the Outlaw's assembly. The interior winds up being impressively clean given the circumstances, as you can actually use the mounting holes under the hard drive cage to keep power cables pinned into place. There are certainly easier enclosures to build in, but very few of them are this inexpensive.

In and Around the BitFenix Outlaw Testing Methodology
Comments Locked


View All Comments

  • Sgt. Stinger - Friday, December 23, 2011 - link

    BitFenix is definitley an interesting company. They seem to be a very small operation, and thats probably why they get to these amazing price points.

    BTW, what happened to this review earlier today? Saw it at work, but when i tried to continue to the next page, the review was down... Puzzled me a bit :)
  • JarredWalton - Friday, December 23, 2011 - link

    Someone changed the post time to later in the day, probably to give another article time at the top.
  • Andrew Rockefeller - Friday, December 23, 2011 - link

    I'm a fan of the left-handed mount arrangement. TBH, I've thought that everyone has been doing it wrong all these years. The next step is to abandon multiple 5.25" bays in mid-towers.
  • know of fence - Saturday, December 24, 2011 - link

    Current case designs may very well be outdated in a year or two.
    Abandon the ugly, stupid drive bays (in favor of external drives), ditch ALL front interfaces and move USB, audio and the power switch to the top of the desk (like a docking bay). It's a no-brainer.
  • Andrew Rockefeller - Saturday, December 24, 2011 - link

    For my own needs, I couldn't agree more. I do however accept that would make it just a little too niche right now. 2 years, absolutely.

    Strangely, I actually sketched up an external front panel remote a few years back. Glad to hear that there are others out there thinking along the same lines.

    ...which makes me think. What if someone designed a case with an external slimline optical enclosure which included the standard front panel functions?? We might finally get rid of gaudy plastic fascias altogether. The external enclosure could even be a standalone product connecting back to a PCI bracket.
  • StevePeters - Friday, December 23, 2011 - link

    Am I seeing the photos correctly - it looks like there is no space at all between the tray and side cover (and none is needed)? I am starting to think that the guys at BitFenix must actually use they cases themselves - they sure look like they know what works!
  • JonnyDough - Friday, December 23, 2011 - link

    "BitFenix has opted for a negative pressure design instead of a positive pressure one, with the exhaust fan pulling air out of the back of the case instead of placing a fan in the front and letting the fan in the heatsink do the rest of the work."

    Preferable. Reason? Noise.
  • jwcalla - Friday, December 23, 2011 - link

    Do people still buy cases this big?
  • colmiak - Saturday, December 24, 2011 - link

    this is kind of an unimportant detail but i'll ask anyway.. ;p

    is the logo seen on the bottom of the case on microcenter's site removable?

    i dont see it on your review case and it looks much nicer like that!
  • Dustin Sklavos - Saturday, December 24, 2011 - link

    It's not removable; it's not affixed to begin with. ;)

Log in

Don't have an account? Sign up now