This is probably the most excited I've been about any SSD launch in quite a while. At CES this year, Crucial announced its M500 SSD - the world's first to use Micron's new 128Gbit MLC NAND die. Courtesy of the cost savings and density increase associated with this new 128Gbit NAND, the M500 would be available in a 960GB capacity, priced at $599. That works out to be around $0.62 per GB for a truly gigantic drive by today's standards. It's exciting. For the past five years I've been learning to live off of less storage that I thought I needed, but the M500 had the potential to spoil me once again.

The M500 starts out with a familiar refrain: a Marvell controller with custom firmware from Crucial/Micron and of course, Micron NAND. All of these parts get updated though, some in more interesting ways than others. The controller is now Marvell’s 88SS9187, an updated version of the 9174 used in the m4. The 9187 is a speed/feature bump over the 9174 and is also used in Plextor’s M5 Pro. I should note that this time around both the Crucial (end user) and Micron (OEM) drives will feature the same M500 branding.

One of the benefits of Marvell’s 9187 is the support for DDR3 memory, which we see exercised on the M500. In its largest configuration, the M500 features 1GB of DDR3-1600. Crucial claims only 2 - 4MB of user data ever ends up in this DRAM, the overwhelming majority of the DRAM is used to cache the page/indirection table that maps logical block addresses to pages in NAND. Like most SSD makers, Crucial won’t talk about the structure of its mapping table but given the size of the DRAM I think it’s safe to assume that we’re looking at a relatively flat structure that should be easy to manage (more on this later).

Crucial / Micron M500 Specifications
  120GB 240GB 480GB 960GB
Controller Marvell 88SS9187
NAND Micron 20nm 2bpc MLC NAND (128Gbit die)
Form Factor 2.5" 7mm/9.5mm, mSATA, M.2 2.5" 7mm/9.5mm, mSATA, M.2 2.5" 7mm/9.5mm, mSATA, M.2 2.5" 7mm/9.5mm
Sequential Read
Sequential Write
4KB Random Read
4KB Random Write
Drive Lifetime 72TB Writes (90% full, 25/75% sequential/random IO - 50% 4KB, 40% 64KB, 10% 128KB)
Warranty 3 years

While the M500’s controller is nothing new, its NAND is. The M500 is the first drive to ship with the latest version of IMFT’s 20nm MLC NAND, featuring 128Gbit die. All previous NAND devices from IMFT (as well as its competitors) top out at 64Gbit (8GB) per 2-bit MLC NAND die. The move to larger die decreases the number of die/devices needed to hit each capacity point, and it also makes 1TB SSDs cost effective for the first time ever.

The cost savings come from the fact that these 128Gbit die aren’t simple doublings of last year’s 64Gbit devices; they include a few changes. The most prominent is a shift in page size from 8KB to 16KB. Larger page sizes are more desirable to implement at smaller NAND geometries, which is why you normally see these page size transitions with major shifts in process technology (e.g. 4KB to 8KB page size transition back at 25nm). The good news is that larger page sizes increase sequential throughput, but at the expense of latency. Given that NAND program times increase with smaller NAND geometries, once again the deck is stacked against manufacturers looking to increase performance as they exploit the benefits of Moore’s Law.

The other big change with the 128Gbit implementation of IMFT’s 20nm process is the inclusion of ONFI 3.0 support. There are some power savings courtesy of ONFI 3.0 (lower voltages, on-die termination), but the big news here is an increase in max interface speed. The previous ONFI interface standard (2.x) topped out at around 200MB/s, while ONFI 3.0 kicks that up to 400MB/s. Crucial’s implementation seems to be limited to around 330MB/s, but the drive isn’t anywhere close to saturating that. Remember the interface speed governs the maximum rate at which you can transfer data to/from a NAND device. Most NAND devices are capable of dual-channel operation so in the higher capacity implementations we’re talking about a maximum NAND-to-controller transfer rate of over 600MB/s. There’s more than enough headroom here.

Supporting the new controller, new NAND die, larger page sizes and ONFI 3.0 obviously require a new firmware, so the M500 ships with an evolution of what Crucial developed for the m4. The end result is vastly improved performance across the board, the big question being how well does it compare to the rest of the world given how much has changed since the m4 first arrived on the market.

The 20nm 128Gbit NAND: Larger Pages, Larger Blocks, Lower Performance & Cost?

Intel/Micron NAND Evolution
  50nm 34nm 25nm 20nm 20nm
Single Die Max Capacity 16Gbit 32Gbit 64Gbit 64Gbit 128Gbit
Page Size 4KB 4KB 8KB 8KB 16KB
Pages per Block 128 128 256 256 512
Read Page (max) - - 75 µs 100 µs 115 µs
Program Page (typical) 900 µs 1200 µs 1300 µs 1300 µs 1600 µs
Erase Block (typical) - - 3 ms 3 ms 3.8 ms
Die Size - 172mm2 167mm2 118mm2 202mm2
Gbit per mm2 - 0.186 0.383 0.542 0.634
Rated Program/Erase Cycles 10000 5000 3000 3000 3000

There's a lot of data in the table above, but if you look closely you'll see a couple of trends. The obvious ones are increasing page and block size over time. NAND program latency has also climbed steadily over the years, while endurance decreased. All in all, the picture looks pretty bleak. It's impressive that performance keeps going up each generation given how much the deck is stacked against seeing continued performance improvements. The increase in program time gives you a preview of what we're going to see in the performance pages. Small writes will take longer. Garbage collection routines on a full drive will also take longer to run as each block that needs to be recycled for use has more pages and more data to deal with. Although Crucial uses a faster controller in the M500 vs. m4, the internal housekeeping it has to do goes up tremendously as well. The M500 isn't a drive that was built in pursuit of peak performance. Instead this drive targets the mainstream.

Looking at the difference in density between the two 20nm NAND devices, there's nearly a 17% increase in density from moving to the larger page/block sizes. It's a remarkable improvement especially when you consider the gains are decoupled from a new process node. Ultimately this is Micron's answer to TLC for the time being. Rather than sacrificing endurance to get to lower price points, the 20nm 128Gbit 2bpc MLC NAND device at mature yields should deliver competitive pricing at higher endurance. Indeed this is the message behind Crucial's M500. The company isn't targeting Samsung's SSD 840 Pro, but rather the TLC based 840.

Price Comparison
  120/128GB 240/256GB 480/512GB 960GB
Crucial M500 $129 ($129) $219 ($202) $399 ($442) $599 ($570)
Intel SSD 335 $181 $220 - -
Samsung SSD 840 $100 $169 $333 -
Samsung SSD 840 Pro $139 $229 $463 -

The reality of it all is the M500's MSRPs are closer to the 840 Pro's street prices than the 840's. MSRPs tend to run a bit high on SSDs, so I wouldn't be too surprised to see the M500 eventually settle down closer to the 840 (remember the MSRP for the 840/840 Pro at 250/256GB are $199 and $269, respectively). It's definitely a different approach to driving costs down vs. going to TLC, and it's one that can't necessarily be repeated each generation, but for now the answer works. I'm not sure how meaningful the added endurance is for most client users, although you could make an interesting case for the M500 in some enterprise workloads that the TLC 840 wouldn't be able to make it into.


The big news is of course the 960GB capacity point. At $599 the 960GB M500 is by far the cheapest drive available at anywhere that capacity. A quick search on Newegg reveals a $1000 Mushkin 960GB drive and a $3000 1TB OCZ Octane. At $599, the 960GB is a steal at $0.62/GB. Even the Phison based 960GB BP4 from MyDigitalSSD weighs in at $799, and OWC's Mercury Electra MAX (3Gbps SATA) is still over $1000. To put the drive's excellent price in perspective, the 960GB M500 has roughly the same MSRP as Intel's 80GB X25-M had back in 2008. That's an order of magnitude more storage capacity at the same price in 5 years time. Moore's Law makes me happy.

Encryption Done Right & Drive Configurations
Comments Locked


View All Comments

  • Crazy1 - Tuesday, April 9, 2013 - link

    Using the 2012 charts from Tom's Hardware I was able to compile some numbers between the 840 pro and popular mobile HDDs. While not a comprehensive comparison, these numbers are coming from a single source, so they should be reliable enough to provide a general understanding that there is a power savings when using an SSD instead of an HDD. These are the average power consumption numbers during the following workloads.

    ------------------------------------idle----------video playback---------Database-
    840Pro 128GB 0.03W 0.4W 1.2W
    840Pro 256GB 0.03W 0.5W 1.4W
    840Pro 512GB 0.04W 0.6W 1.5W

    WD blue 500GB 0.36W 0.94W 2.2W
    WD blue 1TB 0.6W 1.1W 1.9W
    WD black 750GB 0.9W 1.4W 2.4W
    Seagate XT 750GB* 0.8W 2.1W 2.6W

    * The XT 750GB is running sata III. The XT 500GB running sata II gives power numbers closer to the two WD Blue drives.

    It's fairly clear from these numbers that the 840pro uses less power than mobile HDD's. This isn't true for all SSD's though. Some of the Sandforce-based SSDs result in similar average wattage numbers as WD Blue drives. Those SSDs are still more power efficient because they have a better performance-per-watt ratio.
  • Crazy1 - Tuesday, April 9, 2013 - link

    My table was ruined. Hopefully this is easier to read.

    ------------------------------------idle----------video playback---------Database-
    840Pro 128GB _______0.03W ________0.4W__________ 1.2W
    840Pro 256GB _______0.03W ________0.5W __________1.4W
    840Pro 512GB _______0.04W ________0.6W __________1.5W

    WD blue 500GB ______0.36W ________0.94W _________2.2W
    WD blue 1TB ________ 0.6W _________1.1W __________1.9W
    WD black 750GB _____0.9W _________1.4W __________2.4W
    Seagate XT 750GB*___0.8W _________2.1W __________2.6W
  • vol7ron - Monday, December 9, 2013 - link

    Take it to the forums
  • leexgx - Tuesday, July 1, 2014 - link

    personally do not trust TW site but SSDs do use less power then an HDD over the same time (say 10-30 seconds) Peak power on some SSDs mite be higher then an laptop HDD but that be for an extreme short times so a SSD will be idle for most of the time where as HDD is very likely going to be still be active reading due to its Slow random access speeds (Writes normally but your typical laptop is mostly reads, HDDs reads and writes are about the same power wise)
  • Wolfpup - Monday, April 15, 2013 - link

    Yeah, SSDs don't automatically use less power than mechanical drives...and for that matter aren't automatically more reliable either.
  • Arkive - Tuesday, April 9, 2013 - link

    "Bang for the buck" depends entirely on how much storage you need and it's use-case.
  • UltraTech79 - Saturday, April 13, 2013 - link

    Did you just want to be the guy that made a shocking statement or something? Even if its totally fucking false? SSD wont be better bang for the buck for at least another two generations, probably three.

    And everyone discussing power req. is amusing. We are talking about fractions of cents, people, and if you think that adds up somehow in a server environment, you forgot to 'add up' the fact that these will not last even half as long as a enterprise quality HDD/SDD, so your going to have to replace them at least once. Bang for the buck? Bullshit. What these things are, are awesome fast preforming little pieces of amazing - but you will pay for it, get real.
  • leexgx - Tuesday, July 1, 2014 - link

    he was talking about laptop hdds,but still mostly incorrect as Most SSDs idle at under 0.1w where an SSD will be at for most of its life (assuming consumer laptop, not server or workstation loads)
  • mutantmagnet - Wednesday, April 17, 2013 - link

    SSDs are dramatically more vulnerable to brown outs and power surges than mechanical drives. This SSD's price point made me consider briefly I could forgo hard drives completely but SSDs aren't quite there yet.
  • leexgx - Tuesday, July 1, 2014 - link

    interesting (bit of old post to reply to) an SSD dieing to a power surge, i would resolve your issue first

Log in

Don't have an account? Sign up now