Advanced Synthetic Tests

Our benchmark suite includes a variety of tests that are less about replicating any real-world IO patterns, and more about exposing the inner workings of a drive with narrowly-focused tests. Many of these tests will show exaggerated differences between drives, and for the most part that should not be taken as a sign that one drive will be drastically faster for real-world usage. These tests are about satisfying curiosity, and are not good measures of overall drive performance. For more details, please see the overview of our 2021 Consumer SSD Benchmark Suite.

Whole-Drive Sequential Fill

Pass 1
Pass 2

Some of our other tests have shown a few signs that the 870 EVO's write performance can drop when the SLC cache runs out, but this straightforward sequential write pass over the entire drive doesn't reveal any such behavior. The 870 EVO's sequential write performance is extremely consistent, even on the second write pass.

Sustained 128kB Sequential Write (Power Efficiency)
Average Throughput for last 16 GB Overall Average Throughput

Due to the excellent performance consistency, the Samsung 870 EVOs edge out the other SATA drives with marginally higher average sequential write speeds. The entry-level NVMe drives end up much worse off than the mainstream SATA drives once their caches run out, but the more mainstream NVMe drive blows them all away.


Working Set Size

As expected, the Samsung 870 EVO's random read performance shows basically no variation across a range of working set sizes, and that read performance is at least a little bit faster than any of the other SATA drives or the entry-level NVMe drives.


Performance vs Block Sizes

Random Read
Random Write
Sequential Read
Sequential Write

There are no particular surprises in how the Samsung 870 EVO handles IOs of different block sizes. Unlike some drives, it has no trouble with sub-4kB IOs. It offers moderate improvements over the 860 EVO for mid-sized random reads (up to about 128kB). The one negative is that for writes we again see more inconsistency from the 870 EVO than the 860 EVO when testing an 80% full drive. The simple whole-drive sequential write test may not have been able to reveal any SLC caching troubles, but it does seem clear that the caching behavior has some performance regressions for more complicated workloads on a drive that's more well-used—though it's still unlikely to matter for any typical real-world consumer workload.

Synthetic Tests: Basic IO Patterns Mixed IO Performance and Idle Power Management


View All Comments

  • ekon - Wednesday, February 17, 2021 - link

    What (my) world needs is an absolutely rubbish but cheap high capacity SSD. As many cell levels as it takes. Reply
  • jarablue - Wednesday, February 17, 2021 - link

    I have 2 sata WD Blue 1 tb ssds for game installs. They work totally fine and load games fast as hell. SATA ssds are still on point for large game storage space. Reply
  • Spunjji - Friday, February 19, 2021 - link

    It'll be interesting to see if this changes along with software being developed for the new generation of consoles. Reply
  • Duncan Macdonald - Thursday, February 18, 2021 - link

    It takes 10 gig ethernet to exceed the speed of SATA - the SATA limit of 600 MBytes/sec is 4800Mbits/sec - allowing for TCP/IP overhead even a 5GbE link can not carry data as fast as a SATA link.

    SATA is still the only effective way of increasing the internal storage of systems that have no free NVMe slots available.
  • Tomatotech - Thursday, February 18, 2021 - link

    Or a USB3 / USB-C drive taped / velcro’d somewhere in the PC case.

    Could contain either 2.5” HDD, or 2.5” SDD or a m.2 NVME SSD in a USB enclosure. I’ve done that a couple of times with small cases. Works perfectly fine especially with solid state media.
  • edzieba - Thursday, February 18, 2021 - link

    Cable-attached storage still has the massive advantage that you can connect more drives than you have board area for. A regular motherboard may have one m.2 slot, paying out the nose may net you two slots. Selling off a few organs may buy a halo board with 3 or more slots. Or you may need a bloated riser card and occupy as 16x slot (no go for ITX). Or... you can use the at least 4 SATA ports on even the most bargain basement board (with 8 being hardly uncommon) to stuff more capacity in as needed with ease.
    SATA Express was the right idea at the wrong time: a x1 or x2 PCIe interface to allow NVMe, with PHY fallback to SATA, and at entirely acceptable bandwidth for most uses (stick in an m.2 boot drive for OS and key applications) would be a perfect upgrade path for consumer SATA use. If it integrated power transport too (for SSD only, block mechanical drives with keying at the device end cable) it would simplify cable routing too. But that boat has probably sailed for good, unless enterprise just happens to adopt such a connector and drive architecture, which seems unlikely with density demands ever increasing. I don't think we'll see any new internal high bandwidth cabling standards other than PCIe link rate updates to the persistently high-priced OCuLink.
  • Tomatotech - Thursday, February 18, 2021 - link

    For more internal storage, a USB3 / USB-C drive can be taped / velcro’d somewhere in the PC case.

    Could contain either 2.5” HDD, or 2.5” SDD or a m.2 NVME SSD in a USB enclosure. I’ve done that a couple of times with small cases. Works perfectly fine especially with solid state media.
  • abufrejoval - Thursday, February 18, 2021 - link

    I remember experimenting with Compact Flash cards on PCMCIA and IDE adapters, trying to run Windows XP and Linux on them: Sure, there were no seeks, but at the time I didn’t understand the erase block issues yet and was just befuddled how some I/O just seemed so slow it had XP crash.

    When FusionIO came out with their first devices, I jumped on those and they were basically a precursor of NVMe, ouch, is it 13 years already?

    I’ve celebrated SATA SSDs, still have a 160GB Postville under current in a firewall, that may last another 10 years. I lost count, but there may be 30-50 SATA SSD in the house, some still used as „boot stick“ with only 128GB, most 1/4 to 1TB, some with 2TB.

    The only 4TB SSD here is actually a RAID-0 using 4x1TB, because I tend to have plenty of SATA ports left over in all these tower chassis, that used to house 3.5“ HDDs. The last system with 2.4 TB FusionIO card also still sports 4x 200GB Intel enterprise DC3700 MLC drives, just because that X99 board has 10 SATA ports, so why not use them in a RAID so vastly overprovisioned that it will never die?

    Like those ancient HDDs, these SSDs move around between boxes, almost like the „Winchesters“ or removable hard disks in the old days (been around since PDP-11/34). I use carrier-less hot swap bays on all systems, SATA caddies on laptops or USB3/SATA cases, for their flexibility: Milliseconds saved on storage benchmarks don’t compare to productivty and not having to disassemble a workstation with a 3 slot GPU and giant fans for low-noise, just to switch to another OS is a real bonus!

    Most of the time SATA-SSD really is quite simply fast enough. If not, it’s the architecture, stupid!

    And some of the more agonizing waits, turn out to be not at all related to SATA vs. NVMe…

    ARK Survival Evolved is one of my favorite games, because I play that with my kids. Its main downside is loading-time: It just takes ages and ages to launch! Sure, it has 200GB data with all these extra maps and extensions, but perhaps more importantly, it’s files.

    I got really tired of waiting for those minutes it took to load that from HDDs, so I invested in one of those „giant“ 1TB (SATA) SSDs at the time… still took awhile to load, but the improvement was significant (less than one CMU or coffee mug unit). Now, since we all play the game, I tried to be smart and put it on the network in the 4TB JBOD/RAID0 I mentioned, and then upgraded to a 10Gbit network to match the performance.

    Alas, the load times across the 10Gbit network were horrific! Far worse, than the single 2TB HDD I had used in the beginning.

    Then one day I ran ARK on Linux, within a larger experiment on the quality of Linux gaming. I didn’t have a big enough SSD around to store the game data, so instead I used one of those 2TB -WD HDD hunks from 15 years back, that just refuse to fail.

    And then I almost fell of my chair, when ARK launched faster off that HDD than I had ever even see it launch from an NVMe drive (yes, of course, I had to have some of those, too).

    Long story slightly abbreviated, the annoyingly slow ARK launches were never a storage issue, but a Windows file access overhead issue. Linux truly put Windows to shame that day! It managed to load those tens of thousands of files ARK required much faster from a HDD, than Windows needed on NVMe storage, and way, way, WAY faster than Windows (10Gbit) networking from a SATA-SSD RAID0.

    Now, Windows and Windows 10Gbit networking isn’t always and by-default orders of magnitude slower than Linux. At least not, when you’re dealing with a few large files. But when your game (or application) happens to use small files instead of 10 big ones, be advised to test the OS before you blame it on the storage!

    The general protocol and latency overhead of SATA vs. (PCIe)NVMe is no doubt significant.
    As are the benefits of a well established form factor with all those ports and enclosures I already own, and the flexibilty I learned to rely on. Dogma rarely helps and I find myself buying SATA-SSD over NVMe, once the default system boot storage requirements for every box have already been filled (with NVMe, if capable). Mostly because a) SATA SSD are really fast enough already (real bottlenecks are architecture) and b) because aggregating those lower capacity NVMe sticks into RAID0 to extend their usability, is really, really, really expensive, at least so far, because those PCIe switches are so overpriced by Avago/Broadcomm, while SATA multiplexers are cheap and mostly built-into the PCH you already own.
  • zodiacfml - Thursday, February 18, 2021 - link

    I don't mind SATA being limited since it is only huge file transfers are limited, not random performance or game/OS loading. The form factor needs improving though. A quick, cheap way to do that is to simply cut the 2.5" form factor to half or smaller since it will still leave a pair of mounting holes for screws. Reply
  • Snowleopard3000 - Friday, February 19, 2021 - link

    It would be nice to see TLC based 16gb and 32gb SSDs..... look at all that empty space, its not like it is that much more work to do it and it will fit fine. Reply

Log in

Don't have an account? Sign up now