As part of Intel’s suite of hardware announcements at this year’s Intel Innovation 2023 conference, the company offered a brief update on their plans for High-NA EUV machines, which will become a cornerstone of future Intel process nodes. Following some changes in Intel’s process roadmap – in particular Intel 18A being pulled in because it was ahead of schedule – Intel’s plans for the next-generation EUV machines. Intel will now only be using the machines with their 18A node as part of their development and validation work of the new machines; production use of High-NA machines will now come on Intel’s post-18A node.

High Numerical Aperture (High-NA) machines are the next generation of EUV photolithography machines. The massive scanners incorporate 0.55 numerical aperture optics, significantly larger than the 0.33 NA optics used in first-generation production EUV machines, which will ultimately allow for higher/finer quality lines to be etched. Ultimately, High-NA machines are going to be a critical component to enabling nodes below 2nm/20 angstroms.

At the time that Intel laid out their “5 nodes in 4 years” roadmap in 2021, the company announced that they were going to be the lead customer for ASML’s High-NA machines, and would be receiving the first production machine. High-NA, in turn, was slated to be a major part of Intel’s 18A node.


Size Comparison: ASML Normal & High NA EUV Machines

But since 2021, plans have changed for Intel, seemingly in a good way. Progress on 18A has been ahead of schedule, such that, in 2022, Intel announced they were pulling in 18A manufacturing from 2025 to H2’2024. Given that the release date of ASML’s High-NA machines has not changed, however, that announcement from Intel left open some questions about how High-NA would fit into their 18A node. And now we finally have some clarification on the matter from Intel.

High-NA machines are no longer a part of Intel’s production plans for 18A. With the node now arriving before production-grade High-NA machines, Intel will be producing 18A with the tools they have, such as ASML’s NXE 3000 series EUV scanners. Instead, the intersection between 18A and High-NA will be that Intel using the 18A line to develop and validate the use of High-NA scanners for future production. After which, Intel will finally use High-NA machines as part of the production process for their next-generation, post-18A node, which is simply being called “Intel Next” right now.

As for the first High-NA development machine, Intel also confirmed this week that their schedule for development remains on track. Intel is slated to receive their first High-NA machine late this year – which as Pat Gelsinger put it in his keynote, is his Christmas present to Dr. Ann Kelleher, Intel’s EVP and GM of technology development.

Finally, back on the subject of the Intel 18A process, Intel says that they are progressing well on their second-generation angstrom node. The 0.9 PDK, which should be the final pre-production PDK, is nearly done, and should enable Intel’s teams to ramp up designing chips for the process. Intel, for its part, intends to start 18A silicon fab work on Q1’2024. Based on Intel’s roadmaps thus far, that is most likely going to be the first revision of one of the dies on Panther Lake, Intel’s first 18A client platform.

Comments Locked

24 Comments

View All Comments

  • Anymoore - Friday, September 22, 2023 - link

    Intel had said they could only do pitches > 30 nm with 0.33 NA. So does this mean Intel 18A has same design rules as Intel 4? Seems that way, for all four nodes to be ready at the same time.
  • Gondalf - Friday, September 22, 2023 - link

    No because Intel will utilize double exposure on few layers, so both 20A and 18A will are finer in metallization. Also looks like there are some new sw tools that help a lot the DUV double exposure.
    After all TSMC not even think to High-NA, the cost of machines is crazy (2X), they can not afford an high number of them, simple and plain. They go to Double exposure stright.
    However Intel have a niche where these crazy scanners have an economic sense: server SKUs.
  • Mantion - Wednesday, September 27, 2023 - link

    I don't think the current leadership at Intel working. The board needs to demand results and hold leaders accountable.
  • purohitsforpooja - Wednesday, October 11, 2023 - link

    It's great to see Intel's commitment to advancing semiconductor technology with their work on the 18A production node. Keeping pace with ever-shrinking lithography is crucial for the industry's progress. I'm looking forward to the innovations and improved performance this node will bring to future Intel products. Kudos to their dedication to pushing the boundaries of technology.

Log in

Don't have an account? Sign up now