Introduction and Design

Meizu is a company that started out as a music player manufacturer in the mid-2000's and jumped onto the smartphone revolution in early 2008. While traditionally the company has targeted the Chinese market and its current phones are still prioritizing the Asian country, we're seeing increasingly strong offerings that people may want to consider in other international markets such as Europe.

The MX4 Pro marks a change in Meizu's release cadence and flagship line-up. Usually we've seen the company release only one flagship per year, and it seemed that the MX4 was that flagship this year. However, it took Meizu only two months to announce the slightly larger and higher-end MX4 Pro in November. Both phones are incredibly similar in design but employ very different innards, as Meizu goes back to their traditional choice of a Samsung-manufactured SoC and adopts a higher resolution 1536p screen over the 1156p screen in the MX4.

Before going into the design, let's go over the full specifications of the unit:

Meizu MX4 Pro Specifications
SoC Samsung Exynos 5430
(4x A7 @ 1.5GHz & 4x A15 @ 2.0GHz,
Mali T628MP6 @ 600MHz)
RAM/NAND 3 GB LPDDR3-1650, 16/32GB NAND
Display 5.46” 2560 x 1536 JDI "NEGA negative LCD" 546 PPI
15:9 aspect ratio
Network

Marvell "ARMADA Mobile PXA1802" LTE modem

LTE network frequencies:
FDD B1/3/7, TDD B38/39/40/41

Dimensions (H) 150.1 x (W) 77.0 x (D) 9.0 mm, 158 grams
Camera

20.7MP Sony IMX220 sensor,
F/2.2 aperture, ISP 5P lens main camera


5MP OmniVision OV5693 sensor,
F/2.2 aperture, ISP 4P lens front camera

Battery

3350mAh (12.73 Wh) typical rated
3.8V battery chemistry

OS Android 4.4.4 with Flyme 4.0 UX
Connectivity 802.11a/b/g/n/ac WiFi + BT 4.0, USB2.0, GPS/GLONASS
SIM Size MicroSIM
Price

~$499 (32GB International price)

The MX4 Pro uses a Samsung designed and manufactured Exynos 5430 SoC. We've touched on this SoC in our review of the Note 4 Exynos, although I used the Galaxy Alpha as the comparison device in that article. This variant has 4x A7 little cores coming in at a higher 1.5GHz this time around, along with 4x Cortex A15 clocked at 2.0GHz. On the GPU side we have a Mali T628MP6 at 600MHz, same as the Galaxy Alpha. For RAM, we find 3GB of LPDDR3-1650 to enable memory management and multi-tasking capabilities.

The device comes in either 16GB or 32GB NAND variants, with no option for expandable storage as there is a lack of microSD slot. I was surprised to learn of this and am disappointed to see the omission of an added storage option, especially when considering the device has a removable back cover that could have easily offered the space for it.

Cell network connectivity is provided by sort of a new-comer in the high-end flagship segment, Marvell. The ARMADA Mobile PXA1802 LTE modem powers the MX4 Pro offering multi-band LTE capability. Unfortunately the current models of the MX4 Pro, including this review unit, only have a limited selection of FDD bands needed in western markets. European / South American and some Asian users might have luck as B3 and B7 (1800 and 2600MHz) are still relatively widely used in different countries. For European users especially it lacks the crucial 800 B20 EUDD band that provides best reception and power usage. For North American users, LTE is sadly completely out of the question as it doesn't provide any band compatible with the local providers and connectivity is limited to HSDPA on GSM carriers.

The screen is a sizeable 5.46" JDI "NEGA" negative LCD unit with a resolution of 2560x1536. The screen comes in a slightly wider 15:9 aspect ratio, employing 96 more pixels in the width of the display compared to the usual 1440p devices we're getting accustomed to. The "negative" LCD moniker means that the crystals are in their rested default state non-permeable to light, meaning blacks should in theory consume less power compared to typical LCD screens and increase contrast.

The cameras are powered by a Sony IMX220 20.7MP sensor for the main rear unit, and an OmniVision OV5693 sensor sporting 5MP for the front facing unit. The whole device is powered by an embedded 3350mAh 3.8V or 12.73Wh battery that should provide quite good battery life for a device of this size.

Design

In terms of design, the Meizu surprised me. Although its dimensions of (H) 150.1 x (W) 77.0 x (D) 9.0 mm put it only 1.6mm less wide than the Galaxy Note 4 for example, the ergonomics of the device far surpass the Note. The rounded edges and corners of the device make for an excellent grip in the hand, making you forget that the device remains quite thick at 9mm. The 153g weight is also very good for a device of its size and provides great balance when holding it, without it getting too tiring to hold due to its weight, an issue I noticed with heftier devices such as the Mate 7 or Note 4.

Minimal side-bezels also provide a great screen to device-footprint ratio, as the MX4 Pro has the smallest side bezels I've seen on a device. The front design reminds strongly of earlier iPhones and it's pretty evident that Meizu is trying to capture a bit of the Apple design language here. Although the front isn't very original, the sides and back are a unique design.

The device's sides are made of solid aluminum which gives the device a premium feel and cold touch sensation. The rounded sides, as mentioned, provide a good radius in their slope that makes it very comfortable to hold as it transitions towards the plastic back-cover. What's eye-catching are several plastic inlets throughout the edges of the device, similar to what we've seen in Samsung's Galaxy Alpha and Galaxy Note 4. These are highly likely to enable the device to have better signal reception and to avoid the metal rim acting as a Faraday cage.

The bottom front face is where we find an addition to Meizu's traditional button layout, instead of a capacitive button we have a mechanical home button with integrated fingerprint sensor. The home button can be used to turn the device on by tapping it, or turn it off by holding it for 1.5s. Additionally the fingerprint scanner can also function as a capacitive key that can be assigned a variety of functions. I've found it very natural to have it used as a capacitive back key for navigation as it frees up screen estate from the on-screen navigation bar. I'll revisit how navigation on the MX4 Pro works in just a bit.

On the bottom side of the device we find the device's main speaker pointing downwards and on the right side of the phone. The speaker is very loud and clear, much better than what we find on the Note 4 but still not near the range and depth of what can be heard on the Mate 7 or HTC BoomSound devices. On the bottom left side we have the device's main microphone with the microUSB port in the middle. I've found it disconcerting that the microUSB port is inverted compared to nearly every other device I've seen, which made me pause for a few seconds the first time I tried to attach a cable for charging before I realized what I was doing wrong. However, anyone used to the Nexus 5 or HTC phones won't have any issues with the microUSB orientation.

On the top of the device we have a secondary microphone for stereo recording and noise cancellation, flanked by the power button and the 3.5mm headphone jack. Many people would critique the top location of the power button, but given the MX4 Pro's ability to turn the screen on and off via the home button it works relatively well as it provides an opposite location for access to the functionality when holding the device in different ways.

While most of the design is quite good, I noticed that the earpiece isn't well-designed. The front glass sits at a higher level than the earpiece, creating a little groove that is a huge dust magnet. In my experience I found the earpiece full of dust and debris in just a few days of usage. The fact that the inlay has sharp edges because of the front glass doesn't help either when trying to clean it.

The main camera is found on the upper back middle of the phone, right over a dual-tone flash system similar to what we find in many recent flagship smartphones. The camera sticks out by a millimeter and is encased in a metal ring and protected by sapphire glass.

As mentioned the back cover of the device is removable, although this does nothing in terms of functionality as it only provides access to the microSIM slot at the top of the device. The clip system is identical to what Samsung employs in their devices and offers for a solid attachment to the phone. We find the NFC antenna on the back-cover that connects to the phone via spring-contacts. It's interesting to see the actual battery in full view, but it's impossible to remove or disconnect it without further dismantling of the device. Although the battery is not removable, it certainly is still relatively easily replaceable if Meizu provides new battery packs later in the device's lifetime.

Overall, I think Meizu did pretty well in terms of design of the MX4 Pro. There's no obvious or odd features on the phone that would disrupt its simplistic formula. The device comes in four different color options, black front with either metal grey or white back, or a white front with either matte gold or white back.

User Interface - FlymeOS
Comments Locked

70 Comments

View All Comments

  • aryonoco - Monday, February 16, 2015 - link

    As much as I appreciate your in-depth analysis of SoC, power usage and displays Andrei, your taste in UI really baffles me.

    That is the most hideous, disjointed, inexplicably redundant UI I have ever seen on an Android device, and you seem to like it. I'm simply astounded that you like this everything-and-the-kitchen-sink approach that many Chinese OEMs employ in regards to their ROMs. Brian and Anand knew that every additional UI feature comes with a cost, and it's a matter of finding the sweet spot. This point seems to be totally lost on you.

    As an occasional Android developer, I would hate to think what Play Store reviews would look like if phones like this, with their ability to revoke permissions from apps and for users to break apps without realising that they have done so, would look like. Thankfully, no OEM which actually provides customer care support is going to implement this in a Western country, as the support cost is going to be enormous.

    I really don't mean to sound disrespectful, but I'd love for Andrei to limit himself to hardware discussion in future Android devices (in which he is extremely skilled), and leave the UX review for someone with a bit more, shall I say, taste
  • Andrei Frumusanu - Monday, February 16, 2015 - link

    I'm reviewing for the user, not for the OEM. In my opinion Android suffers a lot from Adware and misbehaving apps that such permission managers are a pure benefit to the user as already commented by some others here.

    I have experience in software UI design and user interaction, so while you might disagree with me I see plenty of other people who find Meizu's new UI equally attractive.
  • overseer - Monday, February 23, 2015 - link

    To me Flyme OS has a homescreen with icons ugly as Quasimodo's face and so 2010, but the rest of interfaces (settings, notifications, etc) look strangely okay and taste somewhat close to Lollipop. This is a huge disparity in design practices and keeps me wondering if Meizu's UI designers hold a paranoiac love over that homescreen or they kind of hit a temporary ceilling in their professional competency. I would've taken the plunge for MX4 months ago had I not seen their everlasting homescreen. *_*
  • samflorin - Tuesday, February 17, 2015 - link

    @aryonoco cm11S for One+ called, would like a word on the built in permission manager.
  • ffsmaster - Tuesday, February 17, 2015 - link

    It is a pity that this review does not include the audio system: ES9018K2M+OPA1612.
  • Andrei Frumusanu - Tuesday, February 17, 2015 - link

    I just didn't have anything to write about it. It sounds good? Without proper equipment as in the iPhone 6 review audio testing has become futile.
  • vanguardkl - Wednesday, September 28, 2016 - link

    This. I'm coming back here in Sept 2016 just to say this. This phone is 1.5 years old - has a 2k screen. HD HiFi audio DAC - most people have to spend $100 just to buy this separately - among the best specs seen on any phone - and costs $150 now. I'm buying one as soon as I can - there's nothing that comes close to this value. This phone is a diamond in the rough, and once people know about its gonna be snapped up.. Hopefully this comment stays in the dirt. I have a Meizu M1 Note which I got for $125 and its next to perfect with 1080p screen and all. They provide MONTHLY updates to the OS and improvements all the time. Amazing I'm so happy with Meizu and hopefully they remain buried under the news headlines and I can pick up these phones for cheap.
  • loimlo - Thursday, February 19, 2015 - link

    Nice job! Well-written review!! How about other Chinese vendors like Xiaomi, Oppo, Vivo ?
    I've been using Redmi for a year and am very fond of it. Solid HW/SW given its humble pricing.
  • Hrushi - Thursday, August 6, 2015 - link

    It is surprising to see that anandtech have missed on detailed audio quality analysis even when device have boasted this feature.
  • inguru - Thursday, July 21, 2016 - link

    Brother if you are really considering this to buy please be sure. Coz if something happens you cant fix this one. They have this digital security locked to its mainboard which you will not able to overwrite. No flashtool no ADB no fastboot what ever you try it will never be fixed & they are very dictating by saying send the phone to them but at the time you will b out of warranty and no place you will be able to go to bring it back. Its a dictatorship company. Be aware... you will never want to be in this situation

Log in

Don't have an account? Sign up now