AGESA to Differences With ASRock's X670E Taichi Firmware

Before we head into the testing, we figured it would be a good idea to highlight what we found different (if anything) within the BIOS of ASRock's X670E Taichi motherboard when updating the firmware from each successive version. Although nothing has changed from a GUI perspective, we can at least see some of the main settings that ASRock is presetting once AMD's EXPO memory profiles are enabled. 

Screenshot of ASRock X670E Taichi UEFI firmware: BIOS 1.18 (AGESA

While nothing has changed in regards to the GUI, the most significant change from going from AMD's initial Ryzen 7000X3D-enabled BIOS is that users were able to set crazy levels of SoC voltage; the X670E Taichi would let us put 2.50 V on the SoC, which is ridiculously dangerous. As a reminder, the Ryzen 7000X3D chips are non-overclockable from a core frequency and VCore perspective, though they do support AMD EXPO memory profiles.

ASRock is clearly overshooting SoC voltage to ensure stability for users. When applying AMD EXPO on supported DRAM, all of ASRock's X670E Taichi firmware variants from AGESA to the latest BETA AGESA (BETA) variant, the firmware would automatically apply 1.30 V to the SoC voltage, regardless of what memory frequency is used. If users opt for a lower spec kit such as DDR5-6000 with EXPO, applying 1.30 V is a little overkill, as we found it made no difference to stability until we went below 1.25 V on the SoC voltage.

ASRock X670E Taichi firmware applying changes when using EXPO on our DDR5-6000 EXPO kit.

Looking at the changes that applying memory with an AMD EXPO profile has on the settings, we can see that ASRock automatically changes some key voltage settings relating to SoC, VDDIO, DRAM VDD, and DRAM VDDQ. As we previously mentioned, ASRock automatically applies 1.30 V to the SoC voltage when you use EXPO memory profiles, or even XMP 3.0 profiles, as we found out. The VDD misc voltage was set to 1.10 V from auto, with the DRAM voltage (DRAM VDD/VDDQ) increasing to 1.350 V from 1.10 V. As per the memory specifications and how AMD's Infinity Fabric works, the firmware automatically applied 2000 MHz for Infinity Fabric and changed the UCLK DIV from auto to equal the MEMCLK. 

AMD AGESA Up to Analysis, Testing For Differentials

For our analysis of the changes that AMD's updated AGESA firmware has on specific variables when put under heavy and intensive memory-focused workloads, we'll be splitting the sections into two; memory at the JEDEC default specifications (settings on auto) and with EXPO enabled (DDR5-6000 CL34). 

G.Skill Trident Z5 at DDR5-5200 (JEDEC) Settings

The key variables we'll be focusing on include the following:

  • Peak Temperatures across the CPU die, CPU CCD1 (3D V-Cache), and CPU CCD2 (in °C)
  • Peak Voltages including CPU VDDCR/VDD, CPU VDDR_SoC (SoC Voltage)
  • Peak Current, including CPU Core current and SoC current (in amps)
  • Peak Power, including CPU PPT (from the AM5 socket) and SoC power

In our results, the CPU die temp max average is an average of both CCD1, CCD2, core temperatures and L3 cache temperatures. This isn't to be confused with the average of the CPU die temp average.

Starting with peak temperatures across both CCDs and the die, going from AGESA to AGESA (BETA), we can see that the CCD2 (non-V-Cache) was noticeably higher by just under 25%. The CCD (1) with 3D V-Cache was relatively consistent regarding peak temperatures, with a jump of just 2%. Overall, the CPU die temp, as with CCD1, was higher due to the different core temperatures on CCD2. 

We can see that going to AGESA from resulted in slightly lower temperatures across all of the CCDs and overall die temp, but the latest AGESA (BETA) (at the time of writing) was the hottest of all. One possible reason for the higher temperatures on AGESA is that reducing power from the one component of the CPU, in this case, the SoC allows the actual Zen 4 cores slightly more headroom in terms of power.

Looking at the average temperatures across CCD1 and CCD2 and the overall die temperature, we can see that there wasn't much variance between the different AGESA versions. Even on AGESA with a higher temperature peak, the average is much more in line with the other AGESA versions.

Focusing on voltages, including CPU VDDCR_VDD (memory voltage) and CPU VDDR_SoC voltages, we can see they are consistently within acceptable margins. While we're not focused on CPU VCore as it's well within specification, and hasn't been an issue as the Ryzen 7000X3D series chips are core frequency/voltage locked, the SoC and memory voltages are well within expected levels in line with our G.Skill Trident Z5 Neo DDR5-6000 memory's specifications.

Although we observed higher temperatures across the board on AGESA (BETA) without AMD's EXPO enabled, we can see that AGESA's current peaked higher. While sustained current and voltages can spike higher than the averages, they aren't sustained and shouldn't be of concern, at least not from our testing.

Focusing on the averages of both the SoC and CPU Core currents, we can see that AGESA is slightly more reserved than the initial Ryzen 7000X3D series launch firmware and the latest AGESA (BETA). 

The actual power values monitored using HWInfo show that AGESA (BETA) has a higher peak power from the socket (PPT) than the two other AGESA versions. As we've seen from our testing, AGESA with our ASRock X670E Taichi is more conservative on current and power, so temperatures are lower across the board. Pulling more power from the socket with AGESA (BETA) and our Ryzen 9 7950X3D does explain why temperatures are higher, both at peak and average.

Our testing shows that AMD's AGESA (BETA) is consistent with other AGESA firmware versions at default memory settings. Still, we can see an increase in power draw and temperatures, at least on the ASRock X670E Taichi.

G.Skill Trident Z5 at DDR5-6000 (EXPO Enabled) Settings

Now onto our testing with the AMD EXPO memory profile enabled on our G.Skill Trident Z5 Neo DDR5-6000 CL34 kit. We've added another variable, with our DDR5-6000 kit also running with an applied SoC voltage of 1.25 V in the firmware.

A closer look at peak temperatures shows a slight variation between all three AGESA firmware variants. Using AMD AGESA (BETA) with 1.25V on the SoC voltage, CCD2 peaked at 55.5°C, the CCD without the 3D V-Cache. This was a noticeably higher spike than expected, given that SoC voltage was inherently lower than the other runs (1.30 V on the SoC).

Interestingly, the initial launch BIOS (AGESA for Ryzen 7000X3D processors ran with the lowest temperature on CCD2, and we observed the lowest spike in temps on CCD1 (3D V-Cache) too. Looking at the maximum CPU die temperature average, all were within quite acceptable margins, with nothing noteworthy in this regard and nothing out of the ordinary.

Moving to the average temperatures, we see things are much more balanced between the three AMD AGESA firmware versions. AGESA (BETA) at 1.25 V on the SoC voltage still averaged slightly warmer on the non-3D V-Cache enabled CCD than on AGESA, which was less on average compared to AGESA

Concentrating on peak voltages across both the memory and CPU SoC voltages, we can see that AMD AGESA peaked slightly higher on memory voltage than the other revisions. SoC voltage is consistent across all three AGESA variants at 1.289, showing that ASRock's firmware automatically setting 1.30 V for SoC is working well. At 1.25 V on AGESA (BETA), our SoC voltage reading topped out at 1.239 V, which shows a bit of negative VDroop, a positive in this case.

Again, AGESA is operating with more courage as it pulls more amps than other versions; it's interestingly peaking at a higher current on the SoC voltage than the firmware before it, AGESA It would have been thought that AMD's quick fix BIOS to address SoC voltages would peak at lower variables, and it peaks around half an amp higher than the latest AGESA (BETA) firmware.

Even setting 1.25 V on the SoC, the amperage pulled from the rail responsible for the SoC is lower than 1.30 V, which is expected as less power is fed through it. Although we didn't experience any reported problems in our testing, CPU core current spiked higher on AGESA than the other versions.

Focusing on average amps drawn from the SoC, things on the SoC balance back to expected levels, although there is not much variation comparing all three AGESA firmware. On average, with AGESA and, we can see that the average CPU core current is noticeably higher than AGESA, which is the initial launch BIOS for the X670E Taichi for Ryzen's 7000X3D series.

Lastly, the peak power output with AMD's EXPO memory profile enabled on our Ryzen 9 7950X3D with the ASRock X670E Taichi. As we can see, AMD AGESA peaked out over 5 W higher on the AM5 socket than the other versions, and AGESA seems to be the most conservative regarding this. For SoC power output, AGESA spikes higher on power than the different versions, which could be one of the reasons that AMD replaced AGESA so quickly.

Investigating AMD AGESA Firmware: From AGESA to Conclusion
Comments Locked


View All Comments

  • dullard - Tuesday, May 16, 2023 - link

    I'm confused by the voltages on the first page. This article repeatedly mentions 0.5 V, when I think it intends to say 0.05 V. For example, 1.35 V is 0.05 V over the new 1.30 V.
  • Ryan Smith - Tuesday, May 16, 2023 - link

    You are correct. Thanks!
  • Threska - Tuesday, May 16, 2023 - link

    Seems there should have been physical safeties built into the CPU so at worst the chip would shut down and set a fault flag indicating what the problem was. Annoying, but cheaper than replacing burnt up hardware, and ruined reputations.
  • Samus - Wednesday, May 17, 2023 - link

    This is AMD we're talking about here, not Intel. AMD chips going back to the Athlon XP have always lacked fail safes when compared to the competition.
  • Netmsm - Thursday, May 25, 2023 - link

    what a judgment!
  • cheshirster - Tuesday, May 16, 2023 - link

    "Gamers Nexus Deep-Dive - The Ryzen 7000 CORE Fundamental Issues"
    If you're not new to semiconductors, this video contains absolutely nothing other than some nice die shots.
    There are zero specific details on the matter of burned 7000 CPU's.
    It's basically: "Chips can die from numerous reasons and also we have nice shot of small AMD logo".
  • techjunkie123 - Tuesday, May 16, 2023 - link

    The most annoying thing about these GN videos is that they act as if they really know a lot, when in fact they probably know less than the average anandtech reviewer. Not just this video, but other ones too.
  • TheinsanegamerN - Wednesday, May 17, 2023 - link

    Which one are you referring to, the one that left 2 years ago or the one that left 5 years ago?
  • alpha754293 - Wednesday, May 17, 2023 - link

    This is so stupid.

    What's your beef with GN?

    GN EXPLICITLY STATES that they are learning and that they're NOT experts in failure analysis.

    This is why they, also EXPLICITLY state, they sent it out to an external lab, so that someone who IS a failure analysis expert, can actually do the detailed, technical, failure analysis.

    You seem to have a chip on your shoulder when it comes to GN which has caused your panties to get all bunched up into a wad.
  • Skeptical123 - Thursday, May 18, 2023 - link

    lol it looks like you got that backwards

Log in

Don't have an account? Sign up now