Hexagon 780: A Whole new IP for AI & DSP

Every year Qualcomm likes to talk about its new Hexagon DSPs, with the last few generations also adding to the table new Tensor Accelerators dedicated for ML inferencing. This year’s Snapdragon 888 design also hypes up the new Hexagon 780 design, with the difference being that this time around the generational improvements are truly humongous.

The new Hexagon 780 accelerator IP truly deserves a large increment in its IP numbering scheme, as it’s essentially a ground-up redesign of the company’s existing DSP with scalar and vector execution engines, and the recent Tensor Accelerators. Previously all these execution engines were acting as discrete independent blocks within the Hexagon 600 series family, but that’s now changed in the new IP design.

The new IP block fuses together all the scalar, tensor, and vector capabilities into a single monolithic IP, vastly increasing the performance and power efficiency of workloads that make a use of all the mixed capabilities of the design.

In terms of performance uplifts, scalar execution capabilities are said to be increased by 50%, while tensor execution throughput has doubled. The vector extension units seem to have remained the same this generation, but actual performance of workloads will still have been increased thanks to the new memory architecture of the new IP block.

Qualcomm states that they’ve increased the on-chip SRAM dedicated to the block 16-fold, allowing for larger machine-learning inference models to fit within the block’s memory, greatly accelerating their performance. This larger memory pool also allows for coherency between the scalar, vector and tensor units, allowing for the vastly increased workload handoff time between the different execution engines. I asked about the actual size of this new memory, but the company wouldn’t disclose any further details, just stating that it’s significant.

The company’s engineers were extremely hyped up about the new design, stating that the performance and flexibility of the new design is well beyond that of what other companies can achieve through disaggregated DSP and ML inference engines, sometimes even from different IP vendors.

The most important figure for the new design is the 3x performance per watt claim, which is just a massive generational improvement that you rarely see in the industry.

As is usual for Qualcomm, the company doesn’t actually state the per-block performance increases, but instead opts to showcase an aggregate computational throughput figure shared amongst all of the SoC’s IP blocks, including CPU, GPU, and the new Hexagon accelerator block. This new figure lands in at 26TOPs for the Snapdragon 888, which is 73% higher than the 15TOPs figure of the Snapdragon 865. Given that we’ve seen significant changes in all IP blocks this generation, I won’t attempt a breakdown estimate as it’s likely going to be wrong and off-the-mark anyhow.

The Adreno 660 - A 35% faster GPU

Amongst the improvements which lead up to that 26TOPs figure is a new vastly improved GPU in the form of the new Adreno 660.

Qualcomm still holds architectural details of their GPUs very close to their chest and thus doesn’t go disclose very much about the new GPU design and what has actually changed, but one thing they did talk about is the addition of new mixed-precision dot product as well as FP16/FP32 wave matrix-multiply instructions, which allow the new GPU to increase AI performance by up to 43%.

We’re also seeing the addition of variable rate shading (VRS) onto the Adreno GPU architecture, allowing for coarser pixel shading onto larger pixel blocks for object and screen areas which don’t require as much detail or the native resolution shading wouldn’t be noticeable. This is also a major feature that’s being introduced in the console and new-generation PC graphics cards and GPUs, which should bring greater performance uplift for new gaming titles which take advantage of the new features. It’s great to see Qualcomm bringing this to the mobile space along with the rest of the industry.

For graphics workloads, the new GPU is advertised as being able to increase performance by up to 35%, which is a very major generational performance leap.

Such a performance jump would actually signify that Qualcomm may very well regain the gaming performance crown this generation, having lost it to Apple’s SoCs over the last two generations. Apple’s latest A14 has seen rather conservative gains on the GPU side this year, so a 35% performance gain over the Snapdragon 865 should very much allow the new Snapdragon 888 to retake the leadership position.

A 35% performance increase with a 20% power efficiency increase would indicate that the new SoC would achieve the higher performance at cost of a little higher power consumption, but given the Snapdragon 865’s excellent power characteristics of below 4W, Qualcomm does have a little leeway to increase power this generation.

3200MHz LPDDR5

The new Snapdragon 888 moves from a hybrid memory controller to one that focuses on LPDDR5, and also increases the frequency support for new LPDDR5 to 3200MHz (Or LPDDR5-6400).

For the Snapdragon 865 Qualcomm was rather unenthusiastic about the LPDDR5 switch, saying that it didn’t bring all to great improvements to performance or power efficiency – something which we actually did test out and come to the same conclusion in our review of the two OnePlus 8 phones, where the LPDDR4X variant ended up being no slower and seemingly actually more efficient to us. Apple this year also kept on using LPDDR4X on their A14 and M1 SoCs – pointing out that the benefits aren’t all that great.

For the Snadpragon 888 however, Qualcomm’s engineers seemed more upbeat about LPDDR5 and the new SoC actually being able to utilise the increase memory bandwidth this generation. Without going into details, the company also stated that they’ve improved the overall design of the memory subsystem, improving aspects such as latency.

On the part of the memory subsystem, Qualcomm still employs a 3MB system-level-cache in front of the memory controllers, with the ability of all SoC IP blocks to take advantage of this cache.

The Snapdragon 888: Back to monolithic SoC on 5nm Triple ISPs: Concurrent Triple-Camera Usage
Comments Locked


View All Comments

  • iphonebestgamephone - Sunday, December 6, 2020 - link

    Mediatek gonna trash qualcomm this year!!
  • ChrisGX - Sunday, December 13, 2020 - link

    7FFP has the same density as 7FF but has a number of improvements. The dense TSMC process is 7FF+ (also known as N7+) and it is an EUV node. The dense node you refer to is 7FF+. Somebody seems to have wrongly assumed that P refers to plus - it doesn't. Still, the error after exchange by many hands has become pervasive on the web.
  • EMMVIN - Thursday, December 3, 2020 - link

    When can we expect the detailed analysis of the soc and benchmark comparisons. There is nothing out there that is as detailed as yours. Hope you guys already have an early sample to test :)
  • tuxRoller - Friday, December 4, 2020 - link

    I'm curious if the move to samsung negatively affected clocking. If not, then this is a really cheap move in favor of their later 888+.
  • vladx - Friday, December 4, 2020 - link

    Still no AV1 decoding at least? Pathetic from Qualcomm
  • James5mith - Saturday, December 5, 2020 - link

    "allowing for the vastly increased workload handoff time between the different execution engines"

    So it's much slower now?
  • peevee - Thursday, December 10, 2020 - link

    "multi-frame noise reduction engines inside of the ISPs. It’s said that the quality of the noise reduction has been improved this generation, allowing for even better low-light captures with the native capture mode (no computational photography)"

    What you have described IS computational photography.
  • KarlKastor - Saturday, December 12, 2020 - link

    I can't really understand, where you see the 7LPP in a disadvantage in comparison to N7.

    If you compare the 765G with the middle cores of the 855, you see similar power draw.
    The comparison to the Kirin show higher frequency and higher power for the Kirin. I can't see a winner here. You can't look at the efficiency score. The performance is higher with the Kirin because of the bigger Caches. Double the L2 and 4x L3. Memory bandwidth and SL-Cache is bigger too.
  • ChrisGX - Sunday, December 13, 2020 - link

    You have a point in connection to the N7 but you are on shakier ground with regard to the N7P and N7+. The Semiwiki article shows the density advantage of N7+ process (otherwise known as 7FF+ and mislabelled in the article as 7FFP) used on the Kirin 990 5G SoC. TSMC data likewise underscores the greater density and energy efficiency of the N7+ process.

  • Bunny13 - Wednesday, January 6, 2021 - link

    The more I know about the 888, the more disappointed I am

Log in

Don't have an account? Sign up now