PowerColor Launches Red Dragon RX Vega 56: Lays Groundwork for Mini-ITX Radeon RX Vegaby Anton Shilov on March 30, 2018 9:00 AM EST
PowerColor has released its new graphics adapter based on AMD’s Radeon RX Vega 56 GPU and paired with its own custom PCB. The new Red Dragon RX Vega 56 is based on a rather tiny PCB that it would fit easily into Mini-ITX builds, but ships with a massive triple-fan cooling system that only fits into enthusiast-class PC cases.
PowerColor says that the Red Dragon RX Vega 56 (AXRX VEGA 56 8GBHBM2-2D2HD/OC) video card was designed to make the cost of the board lower without sacrificing performance or reliability. Unlike its Red Devil RX Vega 56 and Red Devil RX 64 brothers, the Red Dragon RX Vega 56 comes on a short PCB and does not offer factory overclocking. Meanwhile, just like more advanced boards, the new graphics card has a BIOS switch for flipping between different performance modes (silent & overclocking). Furthermore, the card has one 8-pin and one 6-pin auxiliary PCIe power connectors, which should be enough even for those who plan to run it at higher frequencies. As for connectivity, the Red Dragon RX Vega 56 has two DisplayPort 1.4 and two HDMI 2.0b outputs.
The Red Dragon RX Vega 56 comes with a large cooling system featuring a copper base, multiple thick heat pipes and three fans. The cooler is two slots wide and 316 mm long, which makes dimensions of the whole construction similar to other graphics adapters based on the Radeon RX Vega. Meanwhile, since the card relies on a short PCB, this potentially opens the door to some aftermarket options; in particular switching out to something more compact (say, a hybrid LCS) in a bid to fit the board into an SFF PC. Obviously, this is something that PowerColor does not recommend doing, but if you want to have a Mini-ITX gaming PC with a Radeon RX Vega inside, buying a custom graphics card and then switching its cooler is the only way to build such a system at present.
|Specifications of PowerColor and Reference Radeon RX Vega Cards
|PowerColor Red Devil Radeon RX Vega 64
|PowerColor Red Devil Radeon RX Vega 56
Red Dragon Radeon RX
Radeon RX Vega 64
Radeon RX Vega 56
|1406 MHz (LCS)
|1247 MHz (Air)
|1546 MHz (Air)
|316 × 150 × 55 mm
|272 × 112 × 40 mm
|2 × 8-pin
|1 × 6-pin
1 × 8-pin
|2 × 8-pin
|2 x HDMI 2.0
2 x DP 1.4
|1 x HDMI 2.0
3 x DP 1.4
The short PCB is probably a bit simpler and cheaper than the long one used for the Red Devil RX Vega boards, which gives the manufacturer some additional flexibility when it comes to pricing of the product. Meanwhile, the shorter and simpler PCB does not necessarily mean that the new graphics adapter has compromises. AMD’s reference design for the Radeon RX Vega uses a 6+1 phase VRM based on the International Rectifier IR35217 power controller with six IR 3598 phase doublers for the GPU power circuity to maximize efficiency. The Red Devil Radeon RX graphics cards use exactly the same VRM as reference cards do, but while it is unclear what is under the hood of the Red Dragon RX Vega 56, it is unlikely that PowerColor sacrificed efficiency for a bit lower BOM cost on a high end product (i.e., the VRM is good enough and it is unlikely that the GPU VRM has less than six phases).
PowerColor says that the Red Dragon RX Vega 56 will be available shortly. When it comes to pricing, the Red Dragon sits below the Red Devil lineup, so expect the new card to cost less than the higher-end products from PowerColor powered by the same GPU.
- PowerColor Announces Red Devil Radeon RX Vega 64 and 56
- XFX to Release Custom Radeon RX Vega 56 and Radeon RX Vega 64 Double Edition Cards
- Radeon RX Vega Unveiled: AMD Announces $499 RX Vega 64 & $399 RX Vega 56, Launching August 14th
- The AMD Radeon RX Vega 64 & RX Vega 56 Review: Vega Burning Bright